This site uses cookiesX

ALTA Wireless Accelerometer - Impact Detect - Commercial Coin Cell Powered

ALTA Wireless Accelerometer - Impact Detect - Commercial Coin Cell Powered
  • Coin Cell
  • AA
  • Industrial
View Format Features
£8000(£96.00 incl. VAT)

Part #:MNS2-8-W1-AC-IM

Frequency:868 MHz (Europe)

Free Delivery

UK orders over £100

Money Back Guarantee

100% refund

Information

Product Description

ALTA wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.

The wireless accelerometer - Impact Detection sensor activates when g-forces are exceeded by a user defined threshold – up to 8 g-force. The user can key in the desired threshold for the g-force trigger. This sensor has two operation modes that can be also selected by the user: High Performance and Low Power. High Performance has an output data rate of 800 Hz with the High Pass Filter cutoff at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High Pass Filter cutoff at 0.25 Hz.

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

 

 

Notes:  These accelerometers do not "stream" continuous data. Please reference the data sheet for further information.

 

 

 

Product Features

  • Detects Impact (G-Force Threshold)

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Accelerometer - Impact Detect - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

 

Specifications

 

Accelerometer Specifications

 
Sensitivity Range ± 2.0 g
 
Measurement Accuracy ± 2.5 %
 
Minimum G Force to Turn On/Wake Up 0.050 g - 0.100 g
 
Fastest Update Interval/Heart Rate in Any Configuration 1 Minute Sampling Rate: 500 Samples/Sec.
 
Current Consumption 0.7 µA (sleep mode)
2mA (radio idle/off mode)
2mA (measurement mode)
25mA (radio RX mode)
35mA (radio TX mode)
 
Sensitivity 096 count/g
 
Data Rate 12.5 Hz Low Power, 800 Hz High Performance
 
High Pass Filter 0.25 Hz Low Power, 16 Hz High Performance
 
Measurement Current 6 uA Low Power, 165 uA High Performance
 
 

ALTA Coin Cell Specifications

 
Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
 
Dimension 2.0 in x 1.125 in x 0.875 in
 
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
 
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
 
Supply Voltage 2.0 - 3.8 VDC
 
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
 
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

 

 

 

 

 

 

 

 

 

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Inclination and vibration testing
  • Assembly line monitoring
  • Orientation sensing
  • Smart machines, smart structures and smart materials
  • Impact load sensing

 

 

 

 

Information

Product Description

ALTA wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.

The wireless accelerometer - Impact Detection sensor activates when g-forces are exceeded by a user defined threshold – up to 8 g-force. The user can key in the desired threshold for the g-force trigger. This sensor has two operation modes that can be also selected by the user: High Performance and Low Power. High Performance has an output data rate of 800 Hz with the High Pass Filter cutoff at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High Pass Filter cutoff at 0.25 Hz.

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

 

 

Notes:  These accelerometers do not "stream" continuous data. Please reference the data sheet for further information.

 

 

 

Product Features

  • Detects Impact (G-Force Threshold)

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Accelerometer - Impact Detect - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

 

Specifications

 

Accelerometer Specifications

 
Sensitivity Range ± 2.0 g
 
Measurement Accuracy ± 2.5 %
 
Minimum G Force to Turn On/Wake Up 0.050 g - 0.100 g
 
Fastest Update Interval/Heart Rate in Any Configuration 1 Minute Sampling Rate: 500 Samples/Sec.
 
Current Consumption 0.7 µA (sleep mode)
2mA (radio idle/off mode)
2mA (measurement mode)
25mA (radio RX mode)
35mA (radio TX mode)
 
Sensitivity 096 count/g
 
Data Rate 12.5 Hz Low Power, 800 Hz High Performance
 
High Pass Filter 0.25 Hz Low Power, 16 Hz High Performance
 
Measurement Current 6 uA Low Power, 165 uA High Performance
 
 

ALTA Coin Cell Specifications

 
Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
 
Dimension 2.0 in x 1.125 in x 0.875 in
 
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
 
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
 
Supply Voltage 2.0 - 3.8 VDC
 
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
 
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Inclination and vibration testing
  • Assembly line monitoring
  • Orientation sensing
  • Smart machines, smart structures and smart materials
  • Impact load sensing

 

 

 

 

Show Recently Viewed Products