This site uses cookiesX

ALTA Wireless Voltage Detection - 50 VDC - Coin Cell Powered

ALTA Wireless Voltage Detection - 50 VDC - Coin Cell Powered
  • Coin Cell
  • AA
  • Industrial
View Format Features
£8400(£100.80 incl. VAT)

Part #:MNS2-8-W1-VD-DC

Frequency:868 MHz (Europe)

Battery: 3-4 years

Range: 300 metres

Free Delivery

UK orders over £100

Money Back Guarantee

100% refund

Information

Product Description

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

 

 

 

 

Product Features

  • Interfaces with other devices or power lines up to 50 volts DC.
  • Max sensor input voltage up to 50 volts DC.

 

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 50 VDC - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

 

Specifications

 

Voltage Detection Sensor Specifications

 
Maximum Rated Input Voltage Up to 50 Volts DC
 
Minimum Rated Input Voltage -50.0 Volts
 
Voltage Detection Threshold Present above ~.47 Volt, Absent below ~.47 Volt
 
Trigger Transmits Data on State Change
 
Open Circuit Reading Voltage Absent
 
 

ALTA Coin Cell Specifications

 
Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
 
Dimension 2.0 in x 1.125 in x 0.875 in
 
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
 
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
 
Supply Voltage 2.0 - 3.8 VDC
 
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
 
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

 

 

 

 

 

 

 

 

 

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring

 

 

 

 

Information

Product Description

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

 

 

 

 

Product Features

  • Interfaces with other devices or power lines up to 50 volts DC.
  • Max sensor input voltage up to 50 volts DC.

 

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 50 VDC - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

 

Specifications

 

Voltage Detection Sensor Specifications

 
Maximum Rated Input Voltage Up to 50 Volts DC
 
Minimum Rated Input Voltage -50.0 Volts
 
Voltage Detection Threshold Present above ~.47 Volt, Absent below ~.47 Volt
 
Trigger Transmits Data on State Change
 
Open Circuit Reading Voltage Absent
 
 

ALTA Coin Cell Specifications

 
Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
 
Dimension 2.0 in x 1.125 in x 0.875 in
 
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
 
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
 
Supply Voltage 2.0 - 3.8 VDC
 
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
 
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring

 

 

 

 

Show Recently Viewed Products