ALTA Wireless Local Alert Unit

ALTA Wireless Local Alert unit
£41800(£501.60 incl. VAT)
Part #:MNO2-8-AV-LA

Free Delivery

UK orders over £500

Money Back Guarantee

100% refund

Information

The ALTA Wireless Local Alert provides three ways to notify people about critical changes and sensor readings from your Monnit IoT network. The Local Alert flashes a red LED, sounds an audible alarm, and displays the important message upon receiving a notification. The Local Alert can also display sensor readings from any sensor on the same account.

Specifications

ALTA Wireless Local Alert Specifications
Power
Standard Operating Range 5 - 8 VDC (can be powered by line power or batteries.)
Power Options
  • 5.5 VDC @ 900 mA power supply (included)
  • 4 x AA sized I .5 V alkaline batteries (included), Only use alkaline batteries.
Current Consumption 10 uA sleep mode)
20 mA radio RX mode
37 mA radio TX mode		 20 mA (buzzer)
520 uA (LCD)
30 mA (LCD backlight)
Operation
Radio Frequencies Available: 940, 900, 868, and 433 MHz
Antenna Connector: RP SMA Female I Gain: 3.0 dBi
Wireless Range 1200 ft. non-line-of-sight
Wireless Communication Messages are sent from iMonnit software through a gateway (no direct sensor to device communication is supported) 1
Message Storage / Memory 10 messages (notifications or sensor readings)
Mechanical
Display LCD (8 lines of text) | 128 x 32 pixels | 71.55 mm (diagonal)
Transflective (visible in sunlight without back light)
LED One Ultra Bright Red LED
(1630 mcd, 110 0 x 45 0 Viewing Angle)
Buzzer 85 dB @ 30 cm, 2.5 KHz +1- 500 Hz
Enclosure ABS plastic
Dimensions 4.0 x 4.0 x 1.6 in. (101.6 x 101.6 x 40.64 mm) Excluding antenna
Weight 11.2 ounces (with batteries installed)
Environmental
Operating Temperature -18 0 to +55 0 C (0 0 to +130 0 F) 2
Storage Temperature -20 0 to +70 0 C (-4 0 to +158 0 F)
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-1/2 V3.1.1 (2017-02), EN 301 489-3 V2.1.1 (2017-03), and EN 62368-1

1. Requires an ALTA Wireless Gateway for operation.
2. At temperatures above 100 0 C, it is possible for the board circuitry to lose programmed memory.

Caution/Notice: This product is designed for application in an ordinary environment with normal room temperature, humidity, and atmospheric pressure. Do not use this device under the following conditions as these factors can deteriorate the product characteristics and cause failures and burnout.

  • Corrosive as or deoxidizing gas - chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas, nitric oxide gas, etc.
  • Volatile or ammable gas
  • Dusty conditions
  • Under low or high pressure
  • Wet or excessively humid locations
  • Places with salt water, oils, chemical liquids, or organic solvents
  • Where there are excessively strong vibrations
  • Other places where similar hazardous conditions exist.

Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Interpreting Sensor Data
User Interface:
xx Notifications, xx Sensor Readings		 Raw Data: (data type, conversion, units)
Notifications: unsigned char, no conversion, NA
Sensor Readings: unsigned char, no conversion, NA
Raw Data (Exported .csv Representation) Notifications I Sensor Readings
Example: 1 | 3

 

 

 

 

 

 

Information

The ALTA Wireless Local Alert provides three ways to notify people about critical changes and sensor readings from your Monnit IoT network. The Local Alert flashes a red LED, sounds an audible alarm, and displays the important message upon receiving a notification. The Local Alert can also display sensor readings from any sensor on the same account.

Specifications

ALTA Wireless Local Alert Specifications
Power
Standard Operating Range 5 - 8 VDC (can be powered by line power or batteries.)
Power Options
  • 5.5 VDC @ 900 mA power supply (included)
  • 4 x AA sized I .5 V alkaline batteries (included), Only use alkaline batteries.
Current Consumption 10 uA sleep mode)
20 mA radio RX mode
37 mA radio TX mode		 20 mA (buzzer)
520 uA (LCD)
30 mA (LCD backlight)
Operation
Radio Frequencies Available: 940, 900, 868, and 433 MHz
Antenna Connector: RP SMA Female I Gain: 3.0 dBi
Wireless Range 1200 ft. non-line-of-sight
Wireless Communication Messages are sent from iMonnit software through a gateway (no direct sensor to device communication is supported) 1
Message Storage / Memory 10 messages (notifications or sensor readings)
Mechanical
Display LCD (8 lines of text) | 128 x 32 pixels | 71.55 mm (diagonal)
Transflective (visible in sunlight without back light)
LED One Ultra Bright Red LED
(1630 mcd, 110 0 x 45 0 Viewing Angle)
Buzzer 85 dB @ 30 cm, 2.5 KHz +1- 500 Hz
Enclosure ABS plastic
Dimensions 4.0 x 4.0 x 1.6 in. (101.6 x 101.6 x 40.64 mm) Excluding antenna
Weight 11.2 ounces (with batteries installed)
Environmental
Operating Temperature -18 0 to +55 0 C (0 0 to +130 0 F) 2
Storage Temperature -20 0 to +70 0 C (-4 0 to +158 0 F)
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-1/2 V3.1.1 (2017-02), EN 301 489-3 V2.1.1 (2017-03), and EN 62368-1

1. Requires an ALTA Wireless Gateway for operation.
2. At temperatures above 100 0 C, it is possible for the board circuitry to lose programmed memory.

Caution/Notice: This product is designed for application in an ordinary environment with normal room temperature, humidity, and atmospheric pressure. Do not use this device under the following conditions as these factors can deteriorate the product characteristics and cause failures and burnout.

  • Corrosive as or deoxidizing gas - chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas, nitric oxide gas, etc.
  • Volatile or ammable gas
  • Dusty conditions
  • Under low or high pressure
  • Wet or excessively humid locations
  • Places with salt water, oils, chemical liquids, or organic solvents
  • Where there are excessively strong vibrations
  • Other places where similar hazardous conditions exist.

Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Interpreting Sensor Data
User Interface:
xx Notifications, xx Sensor Readings		 Raw Data: (data type, conversion, units)
Notifications: unsigned char, no conversion, NA
Sensor Readings: unsigned char, no conversion, NA
Raw Data (Exported .csv Representation) Notifications I Sensor Readings
Example: 1 | 3

 

 

 

 

 

 

Documentation

ALTA Local Alert unit datasheet

Show Recently Viewed Products