This site uses cookiesX

ALTA Wireless AC Current Meter - 150 Amp - AA Battery Powered

ALTA Wireless AC Current Meter - 150 Amp - AA Battery Powered
  • AA
  • Industrial
View Format Features
£14100(£169.20 incl. VAT)

Part #:MNS2-8-W2-CM-150-SW

Frequency:868 MHz (Europe)

Free Delivery

UK orders over £100

Money Back Guarantee

100% refund

Information

Product Description

Monnit wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well.

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

 

 

Notes: 

WARNING: This AC current meter is for monitoring AC voltage only. Do Not Use with DC voltage.

 

 

 

 

Product Features

  • Measures amp hours, max RMS current, min RMS current, and average RMS current.
  • Capable of generating Watt Hour or Kilowatt Hour readings using iMonnit.
  • Data logging for accumulated amp hour readings.
  • Can notify based on current levels or changes in current levels.
  • Measures current from 0 to 150 Amps.

 

 

What does this wireless sensor's data look like in software?

Wireless AC Current Meters - 150 Amp - Data View in Software

 

 

What's in the box?

  • Wireless Sensor
  • Mounting Hardware
  • 2 x AA Batteries

 

 

Specifications

 

AC Current Meter Specifications

 
Accuracy +/- 2% @ 2 to 150 Arms, +/- .4 Arms @ < 15 Arms
 
Current Transducer Frequency Range 50 – 100 Hz
 
Absolute Max CT Current 200 Amps RMS (Arms)
 
Maximum Accurate CT Current 150 Arms
 
Calibrated Accuracy with Appropriate Offset +/- 1% @ 2 to 150 Arms, +/- .2 Arms @ < 2 Arms
 
Offset Limits -1.27 to + 1.27 Arms (default set to +.3 Arms)
 
Measurement Resolution ~.1 Arms
 
 

ALTA AA Specifications

 
Battery Type 2 Replaceable AA 1.5 V Batteries
 
Dimension 4.375 in x 2.470 in x 1.12 in
 
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
 
Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
 
Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
 
Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
 
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 


Specifications Image

Documentation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Applications

 

 

Suggested Application Uses for This Sensor

 

 

  • Current Monitoring
  • Current Usage
  • Amperage Monitoring
  • Amp Hour Meter
  • Watt Hour Meter
  • Kilowatt Hour Meter

 

 

 

 

 

Information

Product Description

Monnit wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well.

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

 

 

Notes: 

WARNING: This AC current meter is for monitoring AC voltage only. Do Not Use with DC voltage.

 

 

 

 

Product Features

  • Measures amp hours, max RMS current, min RMS current, and average RMS current.
  • Capable of generating Watt Hour or Kilowatt Hour readings using iMonnit.
  • Data logging for accumulated amp hour readings.
  • Can notify based on current levels or changes in current levels.
  • Measures current from 0 to 150 Amps.

 

 

What does this wireless sensor's data look like in software?

Wireless AC Current Meters - 150 Amp - Data View in Software

 

 

What's in the box?

  • Wireless Sensor
  • Mounting Hardware
  • 2 x AA Batteries

 

 

Specifications

 

AC Current Meter Specifications

 
Accuracy +/- 2% @ 2 to 150 Arms, +/- .4 Arms @ < 15 Arms
 
Current Transducer Frequency Range 50 – 100 Hz
 
Absolute Max CT Current 200 Amps RMS (Arms)
 
Maximum Accurate CT Current 150 Arms
 
Calibrated Accuracy with Appropriate Offset +/- 1% @ 2 to 150 Arms, +/- .2 Arms @ < 2 Arms
 
Offset Limits -1.27 to + 1.27 Arms (default set to +.3 Arms)
 
Measurement Resolution ~.1 Arms
 
 

ALTA AA Specifications

 
Battery Type 2 Replaceable AA 1.5 V Batteries
 
Dimension 4.375 in x 2.470 in x 1.12 in
 
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
 
Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
 
Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
 
Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
 
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 


Specifications Image

Documentation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Applications

 

 

Suggested Application Uses for This Sensor

 

 

  • Current Monitoring
  • Current Usage
  • Amperage Monitoring
  • Amp Hour Meter
  • Watt Hour Meter
  • Kilowatt Hour Meter

 

 

 

 

 

Show Recently Viewed Products