Part #:MNS2-8-W2-AC-TT
Frequency:868 MHz (Euro)
Battery: 10 years
Range: 360 metres
Free Delivery
UK orders over £500
Money Back Guarantee
100% refund
The ALTA Wireless Accelerometer - Tilt Detection Sensor is a digital, low-power, low-profile, MEMS sensor that can measure acceleration on one axis to provide a measure of the pitch. The sensor constantly monitors a single axis of rotation over a range of -179.9 to +180.0 degrees. The data is displayed in degrees with 0.1° of resolution. If the sensor does not experience a detectable orientation change, the sensor will produce a current report at a time interval (defined by the user). If an orientation change is detected, the sensor will report immediately. User-configurable angles are used to define regions for “Up”, “Down, and “Stuck”. Data is reported when the sensor moves between these regions.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
|
|
Supply Voltage | 2.0–3.8 VDC |
Current Consumption | 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) |
Operating Temperature | -7°C to +60°C (20°F to +140°F) |
Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C (+50°F to +122°F) |
Fastest Update Interval/Heart Rate in Any Configuration | Heartbeat: 1 minute |
Measurement Resolution | 0.1° |
Security | Encrypt-RF® (256-bit key exchange and AES-128 CTR) |
Weight | 0.7 ounces |
Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 |
Measuring Range | 0° to 180° to -180° to -0° (Rotating in positive direction) |
Measurement Accuracy | 0.5° |
Variation Specifications |
|
Max Operating Temperature Using AA Alkaline | -18°C to 55°C (0°F to 130°F) using alkaline |
Max Operating Temperature Using AA Lithium | -18°C to 55°C (0°F to 130°F) using alkaline |
ALTA AA Specifications |
|
Battery Type | 2 Replaceable AA 1.5 V Batteries |
Dimension | 4.375 in x 2.470 in x 1.12 in |
Supply Voltage | 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply) |
Battery Life | At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. ** |
Max Operating Temperature Using AA Alkaline | -18°C to 55°C (0°F to 130°F) |
Max Operating Temperature Using AA Lithium | -40°C to 60°C (-40°F to 140°F) |
Optimal Battery Operating Temperature | +10°C to +50°C (+50°F to +122°F) |
Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
Operating Frequency | 868 MHz Operating Frequency |
Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
Security | Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC) |
Device Range | Device Range Up to 1,200 ft. non-line-of-sight, wireless device range* |
Tracking the position (pitch) of access barriers, heavy equipment arms, and other mission-critical machines.
Example applications include:
The ALTA Wireless Accelerometer - Tilt Detection Sensor is a digital, low-power, low-profile, MEMS sensor that can measure acceleration on one axis to provide a measure of the pitch. The sensor constantly monitors a single axis of rotation over a range of -179.9 to +180.0 degrees. The data is displayed in degrees with 0.1° of resolution. If the sensor does not experience a detectable orientation change, the sensor will produce a current report at a time interval (defined by the user). If an orientation change is detected, the sensor will report immediately. User-configurable angles are used to define regions for “Up”, “Down, and “Stuck”. Data is reported when the sensor moves between these regions.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
|
|
Supply Voltage | 2.0–3.8 VDC |
Current Consumption | 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) |
Operating Temperature | -7°C to +60°C (20°F to +140°F) |
Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C (+50°F to +122°F) |
Fastest Update Interval/Heart Rate in Any Configuration | Heartbeat: 1 minute |
Measurement Resolution | 0.1° |
Security | Encrypt-RF® (256-bit key exchange and AES-128 CTR) |
Weight | 0.7 ounces |
Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 |
Measuring Range | 0° to 180° to -180° to -0° (Rotating in positive direction) |
Measurement Accuracy | 0.5° |
Variation Specifications |
|
Max Operating Temperature Using AA Alkaline | -18°C to 55°C (0°F to 130°F) using alkaline |
Max Operating Temperature Using AA Lithium | -18°C to 55°C (0°F to 130°F) using alkaline |
ALTA AA Specifications |
|
Battery Type | 2 Replaceable AA 1.5 V Batteries |
Dimension | 4.375 in x 2.470 in x 1.12 in |
Supply Voltage | 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply) |
Battery Life | At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. ** |
Max Operating Temperature Using AA Alkaline | -18°C to 55°C (0°F to 130°F) |
Max Operating Temperature Using AA Lithium | -40°C to 60°C (-40°F to 140°F) |
Optimal Battery Operating Temperature | +10°C to +50°C (+50°F to +122°F) |
Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
Operating Frequency | 868 MHz Operating Frequency |
Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
Security | Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC) |
Device Range | Device Range Up to 1,200 ft. non-line-of-sight, wireless device range* |
Tracking the position (pitch) of access barriers, heavy equipment arms, and other mission-critical machines.
Example applications include:
12 month subscription to iMonnit Premiere monitoring service for your wireless sensor network.
The MonnitLink™ Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will ..