The touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert.
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 3100 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Button Specifications (Single Pole Switch) |
|
Type | Single Pole, Single Throw (SPST) |
Switch Function | Off-Momentary (Normally open) |
Electrical Life | 10,000,000 cycles |
Contact Rating | 50mA @ 24VDC |
Visual Confirmation | LED / Activity Light |
ALTA Coin Cell Specifications |
|
Battery Type | Replaceable 3.0V (CR2032) Coin Cell Battery |
Dimension | 2.0 in x 1.125 in x 0.875 in |
Max Operating Temperature | -7°C to +60°C ( 20°F to +140°F ) |
Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C ( +50°F to +122°F ) |
Supply Voltage | 2.0 - 3.8 VDC |
Battery Life | At 1 hour heartbeat setting, coin cell battery will last up to 4 years. ** |
Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
Operating Frequency | 868 MHz Operating Frequency |
Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
The touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert.
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 3100 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Button Specifications (Single Pole Switch) |
|
Type | Single Pole, Single Throw (SPST) |
Switch Function | Off-Momentary (Normally open) |
Electrical Life | 10,000,000 cycles |
Contact Rating | 50mA @ 24VDC |
Visual Confirmation | LED / Activity Light |
ALTA Coin Cell Specifications |
|
Battery Type | Replaceable 3.0V (CR2032) Coin Cell Battery |
Dimension | 2.0 in x 1.125 in x 0.875 in |
Max Operating Temperature | -7°C to +60°C ( 20°F to +140°F ) |
Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C ( +50°F to +122°F ) |
Supply Voltage | 2.0 - 3.8 VDC |
Battery Life | At 1 hour heartbeat setting, coin cell battery will last up to 4 years. ** |
Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
Operating Frequency | 868 MHz Operating Frequency |
Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
12 month subscription to iMonnit Premiere monitoring service for your wireless sensor network.
Replacement CR2032 coin cell batteries for use with Monnit Wireless Sensors.
The MonnitLink™ Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will ..