This site uses cookiesX

ALTA Wireless Voltage Meters - 0-10 VDC - Coin Cell Powered

ALTA Wireless Voltage Meters - 0-10 VDC - Coin Cell Powered
  • Coin Cell
  • AA
  • Industrial
View Format Features
£7300(£87.60 incl. VAT)

Part #:MNS2-8-W1-VM-010

Frequency:868 MHz (Europe)

Free Delivery

UK orders over £100

Money Back Guarantee

100% refund

Information

Product Description

Monnit wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 10 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor, or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage, etc. If the device being measured is passive, the user must supply their own excitation voltage, as the Monnit sensor is really just a “voltage observer”. Cannot be used for AC voltage measurement.

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.


Notes: 

WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 20V WILL DAMAGE the electronics of the Monnit Wireless Sensor. Monnit is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.


Product Features

  • Max sensor input voltage up to 20 volts DC (will return a max of 10 volts in software)
  • Interfaces with other devices up to 10 volts DC

What does this wireless sensor's data look like in software?

Monnit Wireless Voltage Meters - 10 VDC - Data View in Software

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

Specifications

 

Voltage Meter Specifications

Accuracy +/- 3% FS
User Calibrated Accuracy +/- 0.5% FS
Maximum Rated Input Voltage 20 Volts DC
Resolution ~5 mV
Voltage Range 0 – 10 Volts DC
Open Circuit Voltage ~1.880 Volts
 

ALTA Coin Cell Specifications

Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
Dimension 2.0 in x 1.125 in x 0.875 in
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
Supply Voltage 2.0 - 3.8 VDC
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
Enclosure Material ABS
 

ALTA 868 MHz Specifications

Operating Frequency 868 MHz Operating Frequency
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.


Specifications Image

Applications


Suggested Application Uses for This Sensor

  • Battery Health
  • Voltage Measurement
  • Transducer Measurement
  • Machinery
  • Electrical Motors


Information

Product Description

Monnit wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 10 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor, or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage, etc. If the device being measured is passive, the user must supply their own excitation voltage, as the Monnit sensor is really just a “voltage observer”. Cannot be used for AC voltage measurement.

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.


Notes: 

WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 20V WILL DAMAGE the electronics of the Monnit Wireless Sensor. Monnit is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.


Product Features

  • Max sensor input voltage up to 20 volts DC (will return a max of 10 volts in software)
  • Interfaces with other devices up to 10 volts DC

What does this wireless sensor's data look like in software?

Monnit Wireless Voltage Meters - 10 VDC - Data View in Software

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware

Specifications

 

Voltage Meter Specifications

Accuracy +/- 3% FS
User Calibrated Accuracy +/- 0.5% FS
Maximum Rated Input Voltage 20 Volts DC
Resolution ~5 mV
Voltage Range 0 – 10 Volts DC
Open Circuit Voltage ~1.880 Volts
 

ALTA Coin Cell Specifications

Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
Dimension 2.0 in x 1.125 in x 0.875 in
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
Supply Voltage 2.0 - 3.8 VDC
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
Enclosure Material ABS
 

ALTA 868 MHz Specifications

Operating Frequency 868 MHz Operating Frequency
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.


Specifications Image

Applications


Suggested Application Uses for This Sensor

  • Battery Health
  • Voltage Measurement
  • Transducer Measurement
  • Machinery
  • Electrical Motors


Show Recently Viewed Products