This site uses cookiesX

ALTA Wireless Voltage Detection - 500 VAC - AA Battery Powered

ALTA Wireless Voltage Detection - 500 VAC - AA Battery Powered
  • Coin Cell
  • AA
  • Industrial
View Format Features
£11200(£134.40 incl. VAT)

Part #:MNS2-8-W2-VD-AC-SW

Frequency:868 MHz (Europe)

Battery: 10 years

Range: 300 metres

Free Delivery

UK orders over £100

Money Back Guarantee

100% refund

Information

Product Description

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected".

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

 

 

 

 

Product Features

  • Interfaces with electrical devices or power lines from 24 - 500 VAC.
  • Max sensor input voltage up to 600 VAC.

 

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 500 VAC - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • Mounting Hardware
  • 2 x AA Batteries

 

Specifications

 

Voltage Detection Sensor Specifications

 
Trigger Transmits Data on State Change
 
Open Circuit Reading Voltage Absent
 
Full Scale Voltage 24 - 500 VAC
 
Maximum Rated Input Voltage 600 VAC
 
 

ALTA AA Specifications

 
Battery Type 2 Replaceable AA 1.5 V Batteries
 
Dimension 4.375 in x 2.470 in x 1.12 in
 
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
 
Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
 
Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
 
Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
 
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

 

 

 

 

 

 

 

 

 

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring

 

 

 

 

Information

Product Description

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected".

 

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

 

 

 

 

Product Features

  • Interfaces with electrical devices or power lines from 24 - 500 VAC.
  • Max sensor input voltage up to 600 VAC.

 

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

 

 

What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 500 VAC - Data View in Software

 

 

 

What's in the box?

  • Wireless Sensor
  • Mounting Hardware
  • 2 x AA Batteries

 

Specifications

 

Voltage Detection Sensor Specifications

 
Trigger Transmits Data on State Change
 
Open Circuit Reading Voltage Absent
 
Full Scale Voltage 24 - 500 VAC
 
Maximum Rated Input Voltage 600 VAC
 
 

ALTA AA Specifications

 
Battery Type 2 Replaceable AA 1.5 V Batteries
 
Dimension 4.375 in x 2.470 in x 1.12 in
 
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
 
Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
 
Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
 
Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
 
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
 
Enclosure Material ABS
 
 

ALTA 868 MHz Specifications

 
Operating Frequency 868 MHz Operating Frequency
 
Certifications CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
 

Specifications Image

Documentation

Applications

 

 

Suggested Application Uses for This Sensor

 

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring

 

 

 

 

Show Recently Viewed Products