There are no items in your cart
ALTA Wireless Voltage Detection - 500 VAC - Coin Cell Powered
View Format Features
£13300(£159.60 incl. VAT)
Part #:MNS2-8-W1-VD-AC
Frequency:868 MHz (Euro)
Battery: 3-4 years
Range: 360 metres
Free Delivery
UK orders over £500
Money Back Guarantee
100% refund
X
Available Formats
Coin Cell
- Cost Low
- Battery 3 Years +
- Size Small
- Range 360m +
- Connectivity Gateway
AA
- Cost Average
- Battery 12 Years +
- Size Medium
- Range 360m +
- Connectivity Gateway
Industrial
- Cost Higher
- Battery 12 Years +
- Size Average
- Range 360m +
- Connectivity Gateway
- Waterproof IP65
- Solar Power Option
Wi-Fi
- Cost Higher
- Battery 5 Years
- Size Large
- Range 30m-50m
- Connectivity Wi-Fi
- No Gateway Required
Information
Product Description
The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected".
ALTA - Leading Enterprise Grade "Internet of Things" Solutions
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
- Coin cell sensors typically last 3+ years.
- AA and Industrial sensors typically last up to 10+ years.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 3100 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Product Features
- Interfaces with electrical devices or power lines from 24 - 500 VAC.
- Max sensor input voltage up to 600 VAC.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
What does this wireless sensor's data look like in software?
What's in the box?
- Wireless Sensor
- CR2032 - Coin Cell Battery
- Mounting Hardware
Specifications
Voltage Detection Sensor Specifications |
|
| Trigger | Transmits Data on State Change |
| Open Circuit Reading | Voltage Absent |
| Full Scale Voltage | 24 - 500 VAC |
| Maximum Rated Input Voltage | 600 VAC |
ALTA Coin Cell Specifications |
|
| Battery Type | Replaceable 3.0V (CR2032) Coin Cell Battery |
| Dimension | 2.0 in x 1.125 in x 0.875 in |
| Max Operating Temperature | -7°C to +60°C ( 20°F to +140°F ) |
| Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C ( +50°F to +122°F ) |
| Supply Voltage | 2.0 - 3.8 VDC |
| Battery Life | At 1 hour heartbeat setting, coin cell battery will last up to 4 years. ** |
| Enclosure Technology | Monnit PinchPower™ Wireless Sensor Enclosures |
| Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
| Operating Frequency | 868 MHz Operating Frequency |
| Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
Applications
Suggested Application Uses for This Sensor
- Appliance monitoring
- Sprinkler system monitoring
- HVAC system monitoring
- Line power monitoring
- Power coupling monitoring
- Power supply monitoring
- Sump pump monitoring
Information
Product Description
The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected".
ALTA - Leading Enterprise Grade "Internet of Things" Solutions
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
- Coin cell sensors typically last 3+ years.
- AA and Industrial sensors typically last up to 10+ years.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 3100 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Product Features
- Interfaces with electrical devices or power lines from 24 - 500 VAC.
- Max sensor input voltage up to 600 VAC.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
What does this wireless sensor's data look like in software?
What's in the box?
- Wireless Sensor
- CR2032 - Coin Cell Battery
- Mounting Hardware
Specifications
Voltage Detection Sensor Specifications |
|
| Trigger | Transmits Data on State Change |
| Open Circuit Reading | Voltage Absent |
| Full Scale Voltage | 24 - 500 VAC |
| Maximum Rated Input Voltage | 600 VAC |
ALTA Coin Cell Specifications |
|
| Battery Type | Replaceable 3.0V (CR2032) Coin Cell Battery |
| Dimension | 2.0 in x 1.125 in x 0.875 in |
| Max Operating Temperature | -7°C to +60°C ( 20°F to +140°F ) |
| Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C ( +50°F to +122°F ) |
| Supply Voltage | 2.0 - 3.8 VDC |
| Battery Life | At 1 hour heartbeat setting, coin cell battery will last up to 4 years. ** |
| Enclosure Technology | Monnit PinchPower™ Wireless Sensor Enclosures |
| Enclosure Material | ABS |
ALTA 868 MHz Specifications |
|
| Operating Frequency | 868 MHz Operating Frequency |
| Certifications | CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. |
Documentation
Applications
Suggested Application Uses for This Sensor
- Appliance monitoring
- Sprinkler system monitoring
- HVAC system monitoring
- Line power monitoring
- Power coupling monitoring
- Power supply monitoring
- Sump pump monitoring
Recommended Products
iMonnit Premiere - Up to 6 Sensors
12 month subscription to iMonnit Premiere monitoring service for your wireless sensor network.
£49.00
CR2032 Coin Cell Batteries (10 Pack)
Replacement CR2032 coin cell batteries for use with Monnit Wireless Sensors.
£12.00
ALTA Ethernet Gateway
The MonnitLink™ Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will ..
£206.00
Show Recently Viewed Products
